Phosphate Forklift LiFePO4 Battery Electric Traction Battery UL CE
51.2V420Ah Phosphate Forklift LiFePO4 Battery Electric Traction
Battery
Quick Detail:
Features of Forklift Lithium LiFePO4 Battery :
same capacity but much smaller size than lead acid battery
No memory,feel free to charge when you need,maintenance-free.
2000times cycle life at standard charge/discharge rate
REMA/ANDERSON plug for choice
applicabale -20~55℃,and smart BMS provide high or low temerature
protection
support buzzer alaram while SOC<10% or min volt of singel
cell<3.05V
CAN/RS485/RS232 communication for choice
perfect safety performance,NO leakage,No swell
pass the CE,ROHS,UN38.3,ISO9001 certification
Description:
Our lithium iron phosphate battery can cycle 4000+ times, and in
the state of full charge and a full
discharge can cycle more than 1500 times, the service life of the
lead-acid battery is 3 times.
LiFePO4 battery, Can achieve a truly deft effect, It weighs only
30% as much as a typical lead-acid
battery, Easy to carry and easy to install is the best choice for
camping.
LiFePO4 batteries can be used in the following fields: electric
vehicles, recreational vehicles, golf carts,
boathouses, towing motors, lighting, UPS backup power supply, home
solar equipment, portable TV, etc.
Specifications:
EU Warehouse 48V 51.2v Lithium Ion
Battery Lifepo4 100ah 200ah Battery Pack
| Batterypack | No. | Item | General Parameter | Remark |
| 1 | Combination type | I6SIP | |
| 2 | Total energy | 5400Wh | 2.4/kWh |
| 3 | Cycle life | 6000 times | |
| 4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) |
| Minimum Capacity | 100 Ah |
| 5 | Rated voltage | 512 V | Wordking voltage |
| 6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage |
| 7 | Charging voltage | 58.4V | maximum battery voltage |
| 8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK
scheme) | Under half elec trie state, use AC method to measure internal
resistance Ikllz |
| 9 | consistency | The monomer pressure difference at the end of charge and discharge
is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous
pressure difference in a single charging section |
| 10 | Maximum charge and discharge duration current | I00A | |
| 11 | The charging current limiting | 10A | |
| 12 | forking temperature range | Charge: 0-55'C | |
| Discharge: -20-^0'C |
Notices:
1. For outdoors, only to generate power. The efficiency of a solar
panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use,
otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to
move your electronic device into a
cool and ventilated place. If the electronic device is in a
high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it
depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the
different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly,
We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and
places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Contact us for more details about Price, Packing,
Shipping and Discount.
