48V Battery Pack 100Ah Energy Storage High Voltage LiFePO4 Battery
Base Station
48V Battery Pack 100Ah LiFePO4 Battery Solar Energy Storage Systems
Base Station
Quick Detail:
LiFePO4 Battery
Maintenance Free & No Leakage
Extended Service Lifetime
Longer Shelf Life
Excellent Deep Discharge Recovery
Install Them Anywhere
Certification CE, FCC, PSE, UN38.3, MSDS, sea and air transport
report
Description:
1 The appearance of the case is good, and there must be no
scratches, paint drop, deformation, damage, etc .
2 The product label is uniformly pasted under the positive
terminal, the barcode is pasted to the left under the
product label, the adhesive is firm, the information content is
correct, the label material: white PET.
3 Before packaging, the upper computer sets a forced sleep state.
4 The material and hardness of the outer carton ensure the turnover
and transportation safety. The information
mark on the carton is the same as the following figure.
5 There should be buffer packaging material inside; packaging
material considerations:
terminal post placement space, hanging ears and other placement
locations.
6 Our Lifepo4 battery can be discharged continuously for 2000 times
without capacity loss. More than 2000
cycles will gradually wear out, 4000 cycles can still maintain 75%
of the capacity. The cycle life is very long,
you can even use it for many years. However, lead-acid batteries
have only 300 cycles and a low life span.
Lifepo4 battery will be your best choice. Coupled with the light
weight of lithium iron phosphate batteries,
it will become the best choice for outdoor activities.
Specifications:
| Batterypack | No. | Item | General Parameter | Remark |
| 1 | Combination type | I6SIP | |
| 2 | Total energy | 5l20Wh | 5.12/kWh |
| 3 | Cycle life | *000 次 | |
| 4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) |
| Minimum Capacity | 100 Ah |
| 5 | Rated voltage | 512 V | Wordking voltage |
| 6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage |
| 7 | Charging voltage | 58.4V | maximum battery voltage |
| 8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK
scheme) | Under half elec trie state, use AC method to measure internal
resistance Ikllz |
| 9 | consistency | The monomer pressure difference at the end of charge and discharge
is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous
pressure difference in a single charging section |
| 10 | Maximum charge and discharge duration current | I00A | |
| 11 | The charging current limiting | 10A | |
| 12 | forking temperature range | Charge: 0-55'C | |
| Discharge: -20-^0'C |
Notices:
1. For outdoors, only to generate power. The efficiency of a solar
panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use,
otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to
move your electronic device into a
cool and ventilated place. If the electronic device is in a
high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it
depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the
different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly,
We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and
places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Contact us for more details about Price, Packing,
Shipping and Discount.
